Coker Vintage Bias Tire Details All sizes are DOT approved except 28X3 CL UTQG: Not Rated No mileage warranty on these tires. Mileages will vary. Low air pressure can cause the sidewall to crack or lead to tire failure. Recommend static balance with weights on the inside of the tire only in order to protect the soft whitewall. This also gives a better visual appearance. Recommend the use of lug centric balancing over hub centric. Due to the cosmetic whitewall, these tires may take 3-5 ounces to balance. This is normal. Features: Built using modern materials and techniques. All sizes are made in the USA except for the clinchers. The whitewall is molded into the tire, NOT added on after the tire is made. All tires feature a life of the tread warranty. Smooth whitewall with no lettering engraved. Cautions: Modern techniques dictate the use of post inflation during the manufacturing process; this may lead to the tires being slightly larger than an original. Some fitment issues can occur with spare tire wells, side mounts or continental kits. Coker Classics are not an OEM brand but perform on par with the name brand tires. All listed measurements are non-scientific and may change when using different rim widths. never mix bias and radials on the same vehicle because the vehicle may steer uncontrollably. Old rims can be out of round and should be checked prior to mounting.

If you run inner-tubes with your tires, it is imperative that you carefully inspect and remove all stickers on the inside of the tires. We have found as many as six inspection stickers. They are not always easy to remove. We have used a hair dryer to loosen them up. If you do not remove these stickers, they can puncture your inner-tubes and cause a flat tire which could be a safety-hazard. Please call us if you have any questions on this important issue.